How to Make a Taser Out of a Portable Charger

A taser is not a toy for fun with friends. It’s a life-saving thing. Here you can learn how to make a taser from a charger.

You may also like: 5 Best Portable Hedge Trimmers with Battery and Charger

There is a list of parts and tools which will be necessary to create a taser. Make sure you have everything required. Choose the details carefully, paying attention to their quality, as it will depend on whether the device can be effective.

  • Scissors
  • Wire Cutters
  • Duct tape
  • Soldering Iron
  • Wire stripper
  • Hot Glue Gun
  • Charger (It is suitable for both charging for the phone and other devices)
  • Resistor
  • DC motor
  • Copper wires
  • Any switch

You may also like: 9 Best Portable Power Stations (Comparison & Reviews)

Step 1                                                                   

First, you have to take apart the charger. Be patient, as this is quite a long exercise.

Chargers always have a board on the secondary side of the transformer, which most often has to be connected to the adapter using wires. Cut the wires on both sides of the board and then connect the wires from the transformer.

It is not necessary to remove the electrodes from the charger board. They are made of high quality material, and therefore will be able to strengthen the future taser.

You may also like: 9 Best Portable Generators for Camping (Comparison & Reviews)

Step 2

Prepare the shocker case. It should have enough space inside for details. If the components of the shocker are too close to each other this can even trigger an explosion of the device.

If you make a mistake at some stage, it’s possible that the taser just won’t work. And it’s better than an explosion.

And then it’s already you in the knockout, not the man who was going to attack you.

All elements of the future taser will be attached to the best traditions of engineers – with the help of tape.

Although it may not look like a modern device due to a large amount of electrical tape, this does not affect the performance of the stun gun.

The power of the taser depends on the quality and strength of the parts that you used when creating it. For example, the more powerful the charger, the stronger the stun gun will shock. That’s why it’s important to choose the right components.

You may also like: 9 Portable Recheargable Power Supplies (Comparison & Reviews)

Step 3

Now you need to check the device. What if it doesn’t work at all? Check the taser with caution so as not to harm yourself.

Checking the shocker does not mean trying it on yourself or another person. To begin with, just click on the button. If there is a sound of a running motor, it means that you did everything right and most likely made a real shocker.

Please notice that when using a taser, you can see sparks coming out of it. It can also be direct proof that the device works and is dangerous for thieves and maniacs.

If you still can’t fully make sure of the working condition of the stun gun, then take a piece of raw meat or a piece of paper. When the current comes into contact with these surfaces, it is impossible not to see the result.